Maintenance points for horizontal machining centers of dual spindle CNC lathe manufacturers

The spindle of the horizontal machining center of the dual spindle CNC lathe manufacturer is in a horizontal state, usually equipped with a square worktable that can perform indexing and rotary motion. Generally, it has 3-5 motion coordinates, commonly consisting of three linear motion coordinates and one rotational motion coordinate. It can complete the machining of the remaining four surfaces of the workpiece after one clamping, except for the installation surface and top surface, and is most suitable for machining box type parts. Generally, it has a dividing worktable or a CNC conversion worktable, which can process various sides of the workpiece; It can also perform joint movements of multiple coordinates to process complex spatial surfaces.

Some horizontal machining centers are equipped with automatic exchange workbenches, which can not only process workpieces on the workbenches located at the working positions, but also load and unload workpieces on the workbenches located at the loading and unloading positions, greatly reducing auxiliary time and improving machining efficiency.

Double spindle CNC lathe manufacturer

The maintenance of the horizontal machining center body of a dual spindle CNC lathe manufacturer mainly refers to the maintenance of the mechanical parts of the machine tool. As the mechanical components are in the process of motion and friction, maintenance is important to ensure the accuracy of the CNC machining center, such as cooling and lubrication of the spindle box, adjustment and lubrication of the clearance between the gear pair, guide rail pair, and screw nut pair, pre tightening of bearings, adjustment of pressure and flow rate of hydraulic and pneumatic devices, etc. Due to their different functions, structures, and systems, the maintenance content and rules of CNC horizontal machining centers also have their own characteristics, which should be based on their CNC horizontal machining center model system.

① Keep the CNC machining center in good lubrication condition

② Regularly check the hydraulic and pneumatic systems

③ Regularly inspect and calibrate the level and mechanical accuracy of machine tools

④ Timely conduct overtravel limit tests on each coordinate axis

⑤ Perform daily maintenance on the CNC horizontal machining center according to the user manual